Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who appreciates the nimble cooking control of gas cooktops, but requires an electric oven to bake? Discover a dual-fuel range cooker that offers the best of both worlds.
duel fuel range with experience prefer gas cooktops for their superior temperature control and capacity to utilize sophisticated cooking techniques, such as charcoaling. These cooktops can be costly though, especially in the event that you require an additional gas connection and electrician for installation.
What is a 13amp plug?
If you have a dual fuel range cooker (also called a gas and an electric oven) you'll need an electrical outlet of 13 amps. The plug also needs to be wired in the cooker ring circuit by a fully competent electrician.
This ensures the current flowing through the plug does not exceed the safe limit, which could lead to an electrical fire. The current is controlled by a fuse inside the plug. The fuse will blow as soon as it is overloaded. This safeguards the appliance from an overload of electricity.
The fuse is rated at 13 amps as shown on the top of the plug. this is the maximum amount of current that the plug can pass without causing harm to the appliance or overheating the socket. It is important that when replacing fuses, you always use the same amps as the original. There is a risk of overheating a socket if you replace a fuse that has an unrelated rating.
Ceramic 13 amp fuses are very durable, and can withstand high temperatures generated by the range cooker. Ceramic is also fire-proof, which makes it a better option than other types of fuse.
There are many ways to install a 13 amp plug. The plug can be connected to a live socket by using screws or a plastic jaw cord clamp. The clamp must be tightened after the plug is tightly pushed into place.
Some plugs may have a diagram of wiring on cardboard over the pins. These should be removed prior to connecting the wires. It is essential that the wires are trimmed to the right length, as cutting them too long could cause them to be crushed when the plug cover is replaced. The earth wire should be the longest wire to ensure that it is connected before the line and neutral pins.
How do I install an outlet with 13amps?
The majority of dual cookers that use fuel in the UK are equipped with a 13 amp plug. This is vital because ovens can draw significant current, and the standard plug sockets have a 10-amp rating.
Generally speaking new appliances should be equipped with a plug at the point of sale. This is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. However, older appliances might not be connected to an outlet and that is where the issue arises.
When connecting a cooker to an existing plug socket the first step is to make sure that the rating of the fuse in the box is in line with the plug's rating. This is very important because a fuse that is not properly sized could be dangerous.
It is also recommended to ensure that the fuse is fully seated into the cartridge, and that there isn't any movement. The next step is to prepare the flex to be used. Remove the sheathing to reveal the three insulated conductors. Use a utility blade to cut the sheathing just beyond the grip on the cord at the entry point of the plug. The blade will not penetrate the insulated conductors. The nick should be wide enough to allow for the cable and sheathing to separate when the sheathing is pulled back. Finally, cut off the excess sheathing leaving approximately 40mm of length that extends beyond the flexing end.
The flex is positioned over the plug, with the earth terminal at the top and live and neutral terminals at the bottom. Utilizing the colored conductors to guide you and the sheathing is removed from each pin and the internal cable is then plugged into the appropriate terminal using the cord grip. If the plug is fitted with a screw type cord clamp loosen it, and then pull back the insulation to expose the copper conductors. Connect each insulated wire to the correct terminal using the channel inside the plug. Begin with the earth conductor, then the neutral, and finally the live.
What is the maximum draw of a 13 amp plug?
The maximum power draw of the 13amp plug is 3kw at 230 volts. This is a large amount of power, but the standard fuse that comes with the UK plug will not fail until the cable reaches a dangerous temperature. It is crucial to be aware of the power you're using in your kitchen as a defective plug or socket can cause an accident.
The ceramic fuses used in plugtops weigh around 25mm and are suitable for 240V mains. The fuses are marked with an BS Kitemark or a similar mark on the side, and they will contain sand. Glass or plastic alternatives are available, but should not be used in conjunction with a live plug.
In the UK, most dual fuel range cookers are hard-wired. They cannot be plugged directly into a wall outlet. They are typically connected to a dedicated cooker ring circuit that is suitable for appliances that use up to 20 amps.
You can check the ring circuit in your home by examining the fuse box, or by speaking to a local electrician. Ask them if the sockets are on the same ring or if they're separate. They should also be able to inform you if there's an individual circuit that powers your oven.
The size of your kitchen will be a major factor when you're looking to buy a dual fuel range cooker. We have a wide choice of cookers to fit any space, including compact 50-60 cm dual fuel models and vast 90cm + double oven options from top brands like Rangemaster and StovesAreUs.
If you're after something a little more unusual Don't worry, we also offer a fantastic selection of electric and gas multifunction cookers. These multifunction cookers allow you to cook a variety of meals like pasta, casseroles and curries.
Currys offers a broad selection of Cookers. Explore our online collection or visit us in our store to view them. We provide free delivery and home installation on selected range cookers and we also offer flexible payment options. Our team is on hand to answer any questions you have. Contact us via email or by phone. Credit is subject to status, and terms & condition apply.
What is the maximum current draw of a cooker switch?
There is a lot of confusion about the maximum current draw of a cooker switch. Most cookers are hard-wired and connected to a specific oven-ring circuit not a standard socket. This is due to the fact that they often draw more than 20 amps of power when the gas and electric ovens are being used.
You will not find dual fuel range cookers that can be installed in a standard socket, as this would pose an enormous fire risk and would violate electrical regulations. An experienced electrician will install any new electrics to the kitchen cooker and ensure that the total load (both the hob and oven) will not exceed the power capacity of the circuit.
Dual fuel range cookers combine the flexibility of a gas stove with the precision and precision of an electric oven. They are adored by both chefs and home cooks. Dual cookers that use fuel are great for experimenting with various cooking techniques, such as searing or charring.
When you are looking to purchase a new range cook, you should consider several factors such as size, function and cost. It is also necessary to have an electrical connection to your home to allow the appliance. If you aren't sure, it is best to book a Gas Safe engineer to inspect your home prior to installation.
Currys' dual fuel range cookers are available with a variety of models to suit all budgets. From affordable models by Indesit and Zanussi, to our own Essentials collection. If you're looking for something bit more sophisticated we also carry a wide selection of premium JennAir ranges, which come with a number of innovative features.
When you purchase a new dual fuel range cooker, it is essential to read the manual of the owner for specific information on the electrical and gas requirements. You will need to ensure that your home has a gas hook-up suitable, and you may need to have a plumber install this for you if necessary. It is also possible to require a dedicated cooker-ring circuit, installed by a certified electrical engineer.